Estoy peleándome con el tema de la red. Quiero reproducir cosas sin necesidad de ir arriba y abajo con el disco duro en casa.
Veo perfectamente el ordenador, puedo reproducir las películas, pero como tiro de PLC, cuando el bitrate es alto, me va a tirones. decir que los PLC's los conecto a la red directamente pero pasan a través de magnetos. Son unos Zyxel PL100.

Ejemplos de ficheros de 720p

Esto lo reproduce perfectamente

Vídeo
Nombre de canals : 1
Format : AVC
Format/Info : Advanced Video Codec
Perfil : High@L5.1
Format_Settings_CABAC/String : Sí
Format_Settings_RefFrames/String : 3 fotograma2
MuxingMode : Container profile=Unknown@5.1
CodecID : V_MPEG4/ISO/AVC
Durada : 20mn 35seg
Bit ràtio : 3 256 Kbps
Ràtio nominal : 3 194 Kbps
Amplada : 1 280 píxels
Alçada : 720 píxels
Relació d'aspecte : 16:9
Imatges per segon : 25,000 fps
FrameRate_Original/String : 23,976 fps
Resolució : 8 bits
Colorimetry : 4:2:0
ScanType/String : Progressiu
Bits/(Píxel*imatge) : 0.141
StreamSize : 479 MiB (82%)
Títol : 720p X264(25 fps)
Escrivint la llibreria : x264 core 58 r798M 17e5dac
Opcions de codificació : cabac=1 / ref=3 / deblock=1:0:0 / analyse=0x3:0x133 / me=hex / subme=6 / me-prepass=0 / brdo=0 / mixed_ref=0 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=1 / deadzone=21,11 / chroma_qp_offset=0 / threads=8 / nr=0 / decimate=1 / mbaff=0 / bframes=3 / b_pyramid=1 / b_adapt=1 / b_bias=0 / direct=3 / wpredb=1 / bime=1 / keyint=240 / keyint_min=24 / scenecut=40(pre) / rc=2pass / bitrate=3194 / ratetol=1.0 / rceq='blurCplx^(1-qComp)' / qcomp=1.00 / qpmin=10 / qpmax=51 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / ip_ratio=1.40 / pb_ratio=1.30 / aq=1:0.5:13.0
Estos dos van a tirones.

Vídeo
Nombre de canals : 1
Format : AVC
Format/Info : Advanced Video Codec
Perfil : High@L4.0
Format_Settings_CABAC/String : Sí
Format_Settings_RefFrames/String : 9 fotograma1
MuxingMode : Container profile=Unknown@4.0
CodecID : V_MPEG4/ISO/AVC
Durada : 40mn 24seg
Bit ràtio : 6 017 Kbps
Ràtio nominal : 6 208 Kbps
Amplada : 1 280 píxels
Alçada : 720 píxels
Relació d'aspecte : 16:9
Imatges per segon : 23,976 fps
Resolució : 8 bits
Colorimetry : 4:2:0
ScanType/String : Progressiu
Bits/(Píxel*imatge) : 0.272
StreamSize : 1,70 GiB (61%)
Títol : Lost (Perdidos) 1x02 Piloto Parte II
Escrivint la llibreria : x264 core 67 r1171M 2c7cb4c
Opcions de codificació : cabac=1 / ref=9 / deblock=1:-3:-3 / analyse=0x3:0x133 / me=umh / subme=9 / psy_rd=1.0:0.0 / mixed_ref=1 / me_range=32 / chroma_me=1 / trellis=2 / 8x8dct=1 / cqm=0 / deadzone=21,11 / chroma_qp_offset=-2 / threads=6 / nr=0 / decimate=0 / mbaff=0 / bframes=6 / b_pyramid=1 / b_adapt=2 / b_bias=0 / direct=3 / wpredb=1 / keyint=250 / keyint_min=25 / scenecut=40 / rc=2pass / bitrate=6208 / ratetol=1.0 / qcomp=0.60 / qpmin=10 / qpmax=51 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / ip_ratio=1.40 / pb_ratio=1.30 / aq=1:0.75
Idioma : Anglès
Vídeo
Nombre de canals : 1
Format : AVC
Format/Info : Advanced Video Codec
Perfil : High@L4.1
Format_Settings_CABAC/String : Sí
Format_Settings_RefFrames/String : 5 fotograma1
MuxingMode : Container profile=Unknown@4.1
CodecID : V_MPEG4/ISO/AVC
Durada : 2h 41mn
Bit ràtio : 6 361 Kbps
Ràtio nominal : 6 500 Kbps
Amplada : 1 280 píxels
Alçada : 720 píxels
Relació d'aspecte : 16:9
Imatges per segon : 23,976 fps
Resolució : 8 bits
Colorimetry : 4:2:0
ScanType/String : Progressiu
Bits/(Píxel*imatge) : 0.288
StreamSize : 7,18 GiB (80%)
Escrivint la llibreria : x264 core 93 r1542 5b86182
Opcions de codificació : cabac=1 / ref=5 / deblock=1:-1:-1 / analyse=0x3:0x113 / me=umh / subme=9 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=2 / deadzone=21,11 / fast_pskip=0 / chroma_qp_offset=-2 / threads=12 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=2 / b_bias=0 / direct=3 / wpredb=1 / wpredp=2 / keyint=250 / keyint_min=25 / scenecut=40 / intra_refresh=0 / rc_lookahead=40 / rc=2pass / mbtree=1 / bitrate=6500 / ratetol=1.0 / qcomp=0.60 / qpmin=10 / qpmax=51 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / ip_ratio=1.40 / aq=1:1.00
Idioma : Castellà
¿A que velocidad tendría que ir el PLC para que no diera tirones?

Gracias por adelantado y un saludo.