Cita Iniciado por Gn0m4 Ver mensaje
Esta es la diferencia entre lo que proporciona MiniDSP y lo que proporciona Cross-Spectrum:







El motivo de que MiniDSP no adjunte la calibración estandar por debajo de 20Hz es:

Low frequency calibration: Our initial calibration files (SN#700-0000~700-0189) provided by the microphone supplier at the factory were done down to 5Hz. After few investigation and feedback from the field, we realized that achieving accurate calibration data down @ 5hz was just not possible unless done in an anechoic chamber. Reproducing accurate data (from a speaker) at 5Hz just requires an extensive setup. In a factory floor and the quantity we're talking about, it's unfortunately not practical. For this reason, it was decided to remove the data from 5~20Hz from all calibration files. This step was taken in an effort to provide accurate data for future revision and in general no microphone will have data below 20Hz. With this said, we realize that some of you bought this microphone previous to this update to our specifications on the miniDSP website(i.e. Early Feb 2013 ). To clarify a potential misunderstanding, the microphone will still be able to perform measurements down to 5Hz. Nothing changed with that regards. What changed is the fact that the calibration file isn't provided with calibration results down to 5Hz. Hoping this clarifies. For those of you who feel it is an issue, please see below for the possibility of product return.

Hola a todos

Vuelve a estar disponible el micro UMIK-1 en la página de cross-spectrum. Yo he podido comprarlo ayer noche a traves de pago paypal.
Por si a alguien le interesa.

Un saludo