Cita Iniciado por peque Ver mensaje
¡Perfecto entonces!

Si me dices que en las especificaciones además soporta diseqc 1.2 ya me caigo de culo... y si además también soportara USALS, entonces tendría que quitarme el sombrero ante los amigos de Samsung.
¿Estás sentado?

Extraído del manual de la C6800:

■■ LNB Settings: Configures the outdoor equipment.
–– Satellite: Selects the satellite for receiving digital
broadcasts.
–– Transponder: Selects a transponder from the list or
adds a new transponder.
–– DiSEqC Mode: Selects DiSEqC mode for the
selected LNB.
–– Lower LNB Oscillators: Sets the LNB oscillators to a
lower frequency.
–– Upper LNB Oscillators: Sets the LNB oscillators to a
higher frequency.
–– Tone 22 kHz (Off / On / Auto): Selects the Tone 22
kHz depending on the LNB type. For a universal LNB
it should be Auto.
–– Signal Quality: Display the current status of
broadcasting signal.
■■ Positioner Settings: Configures the antenna positioner.
Positioner (On / Off): Enables or disables the positioned
control.
Positioner Type (USALS / DiSEqC 1.2): Sets
the positioned type between DiSEqC 1.2 and
USALS(Universal Satellite Automatic Location System).
–– My Longitude: Sets the longitude for my location.
–– My Latitude: Sets the latitude for my location.
–– Satellite Longitude Settings: Sets the longitude of
user defined satellites.
User Mode: Sets the position of satellite antenna
according to each satellite. If you store the current
position of satellite antenna according to a certain
satellite, when the signal of that satellite is needed,
the satellite antenna can be moved to pre-populated
position.
–– Satellite: Selects the satellite to set the position for.
–– Transponder: Selects a transponder from the list for
signal reception.
–– Moving Mode: Selects the movement mode between
discrete and continuous movement.
–– Step Size: Adjusts the step size degrees for the
antenna rotation. Step Size is available when Moving
Mode is set to Step.